Resetter Printer Canon MP198 & MP250 [Tutorial]

Labels: Canon Resetter 7 comments

Service tutorial for canon printer MP198 and also can be applied on Canon MP250 series. This tutorial can be used to repair Error E27on the printer. Canon Pixma MP198 and MP250 serias is multifunction printer that features with scanner besides printing features. It also can be used as photocopy functions.

I got this tutorial from various source on the internet. The reset methods method worked on Canon MP198 also on MP250 series.

Here the tutorial Manual Reset for Canon MP198

  1. Start with printer OFF
  2. Hold down STOP/RESET and then hold down POWER
  3. Release STOP/RESET (don’t let go of the power just yet)
  4. press RESUME twice, then release POWER
  5. let green light blink until printhead has finished moving.

Reset Canon MP198 Using Service Tool/Software Resetter

  • Download the software resetter. You can download the software on this link
  • Extract the zip file downloaded and run the application (ServiceTool_V1074.exe). The software should detect your printer.
  • Click on MAIN button. The printer will printing a page with text “D=000.0 Ps=000.0”.
  • Click “EEPROM Clear” button then click “EEPROM”. The printer will print again a page with text “TPAGE(TTL=00000 COPY=00000)”
  • Turn off the printer, done.

The printer will work normal again. If the link above broken you can use following link to download the software resetter. Download now

7 Responses to "Resetter Printer Canon MP198 & MP250 [Tutorial]"

avatar
andijaka March 12, 2010 at 7:21 AM

thank you for your posting... it's very useful for me... now i can use my printer again...

avatar
Unknown April 29, 2010 at 10:39 AM

good day!

i have an mp198, ive dismantled it...now i cant put it back the way it was...

i have all the parts, could u help me putting them back together?

netguidescybercafe@yahoo.com

tnx!

avatar
infus printer epson December 19, 2010 at 8:18 PM

thank you very much, I just download the software and try it.

avatar
Anonymous December 20, 2010 at 10:29 PM

thanks a lot for!! after 5 hours of trying to fix e27 on my canon mp198, i finally succeed.. the manual way doesn't work alone either the resetter alone.i used both.

avatar
Anonymous July 25, 2011 at 7:54 AM

ayaw na po mg feed ang printer k k anu po kyang problema? klangan po bang i reset lang ang printer k? pls. help...

avatar
Anonymous August 26, 2011 at 8:11 AM

boss, pano naman kung naka ilaw lang ang alarm, pag plug mo pa lang sa outlet naka ilaw na sya, di mo man lang ma on ang printer....

avatar
mwjahead July 18, 2020 at 9:37 AM

شكرا جزيلا البرنامج يعمل :)