Resetter Canon ip2770 Download and Tutorial

Labels: Canon Resetter 2 comments

A few days ago my friend send me a resetter for Canon Pixma iP2770. Who need the resetter for these Pixma serial can download for free.

Resetter Canon ip2770

Before using the Canon ip2770 resetter. You must eliminate blinking led error on the printer. This Pixma series need to be reset if the led (red and green) blinking. To reset permanently you can use software resetter that can be downlaoded on this page.

First Steps: Manual Reset Canon PIXMA iP2770

  • Turn off the printer. Power/adaptor still connected to power source.
  • Press and hold RESUME button. The press POWER button until green led lights up.
  • Release RESUME button without releasing POWER button.
  • Press RESUME button 5x and released both button (RESUME+POWER).
  • Computer will find new device.

Secont Steps: Reset Using Software Resetter

  • Download software resetter on This link and run the resetter.
  • Turn on printer. The Canon software resetter shloud detect Canon PIXMA iP2770 printer in your computer.
  • Click on MAIN. The printer will print on a paper.
  • Click EEPROM CLEAR then EEPROM.
  • Turn off the printer and turn on it again. Your printer will work like new or normal printer.

I hope the Canon PIXMA iP2770 resetter useful for you. And use the Canon software as your own risk.

2 Responses to "Resetter Canon ip2770 Download and Tutorial"

avatar
roy April 15, 2011 at 8:49 PM

As what i had learn, you can't reset the canon ip2770 if you do not reset the printer manually.. you net to reset it using this step..
-unplug your printer
-long press the ON/OFF Button and plug the printer, and press the resume button twice, then release the the ON/OFF Button, and wait until your printer will stop reading the cartridge. then unplug the printer again then plug then press ON. after that, reset the printer using the software.

avatar
Fauzan A October 14, 2015 at 4:17 PM

Post about resetter above updated. Now with complete info and resete methods